Mould for IN-LINE Concrete Fishing Weights
Mould for IN-LINE Concrete Fishing Weights
For making your own in-line concrete fishing weights
The mould is designed for making IN-LINE concrete fishing weights. Unlike traditional weights with an eyelet, the finished weight has a 3.5 mm diameter plastic tube running through its centre, through which the fishing line or leader material can pass.
The mould is designed so that the 3.5 mm diameter plastic tube can be inserted directly into the mould before pouring the concrete. Once the concrete has hardened, you get a finished in-line weight with a central line channel.
Main Features
- for making IN-LINE fishing weights
- mould with 3 cavities
- designed for concrete with a density of approximately 2100 kg/m³
- available in 60 g, 80 g, 100 g and 120 g versions
- the 3.5 mm diameter plastic tube is inserted directly during casting
- mould manufactured from PETG using 3D printing
- made in the Czech Republic
Important
For easy removal of the finished weights, we recommend applying a suitable concrete release oil or ordinary cooking oil to the mould before each use.
Note: The final weight may vary slightly depending on the concrete mixture used, the amount of water and the degree of compaction.
Product sorting
Brands
List of products
⚠️ IMPORTANT: THE PLASTIC TUBES REQUIRED FOR MAKING IN-LINE WEIGHTS ARE NOT INCLUDED WITH THE MOULD AND MUST BE ORDERED SEPARATELY HERE! Weight of the finished concrete...
⚠️ IMPORTANT: THE PLASTIC TUBES REQUIRED FOR MAKING IN-LINE WEIGHTS ARE NOT INCLUDED WITH THE MOULD AND MUST BE ORDERED SEPARATELY HERE! Weight of the finished concrete...
⚠️ IMPORTANT: THE PLASTIC TUBES REQUIRED FOR MAKING IN-LINE WEIGHTS ARE NOT INCLUDED WITH THE MOULD AND MUST BE ORDERED SEPARATELY HERE! Weight of the finished concrete...
⚠️ IMPORTANT: THE PLASTIC TUBES REQUIRED FOR MAKING IN-LINE WEIGHTS ARE NOT INCLUDED WITH THE MOULD AND MUST BE ORDERED SEPARATELY HERE! Weight of the finished concrete...
_en.png?67d75fbd)